Updating firmware for dell equallogic ps series storage arrays
The Storage Update Manager is included in the San HQ software, used for managing your Equal Logic array.I’ve used the following order, based on documentation and Storage Update Manager: San HQ upgrades are not included in Storage Update Manager, but the rest is.When running through the wizard, you can point to a folder where you saved the disk and array firmware files.It will automatically detect and verify if you’ve got the right files in there before continuing with the upgrade wizard.It provides an outline of all components that require updating and shows the estimated time for completion.Deployed as a standalone Java application, Dell Storage Update Manager runs independently from Group Manager and SAN Headquarters, but offers a similar interface and help features.If you do not have one of the identified configurations or if you are unsure of your applications ability to tolerate the restart, you should consider planning for downtime when updating firmware.This can involve shutting down the hosts accessing the group before beginning the update procedure.
Plug a laptop into the same vlan, and run the “Remote Setup Wizard” from the CD that came with the SAN.The firmware update will not take effect until the array is restarted. Do you want to proceed (y/n) [y]: Active and secondary control modules detected. The Dell Storage Update Manager application helps you analyze your current Dell Equal Logic storage configurations to determine which components, if any, can or need to be updated.Using a multistep firmware update wizard, Dell Storage Update Manager guides you and simplifies the update process.
Search for updating firmware for dell equallogic ps series storage arrays:
local: kit_1234567remote: kit_1234567229 Entering Extended Passive Mode (|||65534|) 150 Opening BINARY mode data connection for 'kit_12345678.tgz'.